Your pool tiles may be beautiful, but they are also functional. Without your tiles, the pool water would soak into the pool walls. This water seepage not only causes expensive water loss, but can also damage the shape, foundation, and general integrity of the pool.

Most in-ground swimming pools settle with age, meaning the ground surrounding the pool shifts. This shifting and settling may cause the tile to crack, burst off, or crumble. Pool tile repair is a crucial and fairly simple part of pool maintenance. Follow these ten simple steps to repair your pool’s tile to restore the beauty and functionality of your pool.

Step 1. Let down the water level in your pool so that the tile or tiles, you need to fix are exposed. Allocate 24 hours for the area to dry.

Step 2. Using a small mallet and chisel, pry off the damaged grout that surrounds the tile that needs replacing. Using the same hammer and chisel, also get rid of any mortar on the pool wall behind the broken tile.

Step 3. Calculate the depth of the substrate that will be behind your new tile. If the depth is greater than 1/8th of an inch, you must apply plaster to bring the depth to less than 1/8th of an inch.

Step 4. To prepare the plaster, mix it with the special swimming pool plaster additive that will come in the pool tile repair kit. The plaster should have the constituency of applesauce.

Step 5. Apply some water to the spot where you want to put the new tile to keep the plaster from hardening too quickly. Then, evenly apply the plaster on the uncovered substrate with a putty scalpel. Leave enough space so that you can apply a tile, and 1/8th inch of thinset after the plaster has dried for 24 hours.

Step 6. Prepare the swimming pool thinset by mixing it with water. It should be the consistency of whipped potatoes.

Step 7. Evenly spread 1/8th of an inch of thinset on top of the plaster and the undecorated side of the new tile. Press the tile into the thinset, making it flush with the other tiles.

Step 8. Prepare at least a half of one jug of pool tile grout. It should be the consistency of whipped potatoes.

Step 9. Apply the grout into the spaces among the tiles using your fingers. Be sure to wipe off any extra grout before it dries. Allow it to dry for 24 hours.

Step 10. Fill the pool back to the required depth, and enjoy!

Pool tile repair is a crucial step in the maintenance of your pool. Use this ten-step guide to help you correctly repair your pool tiles to maintain the beauty and functionality of your swimming pool.

If you have tiles that have come loose, repairing them sooner than later will probably avoid additional costs and inconvenience. If they are left loose, they can come off and potentially break. There is also the possibility that people can trip over loose tiles on the floor and be injured. There are a few different options if you have loose tiles and some of them are better than others.

You can opt to pull up all of the tiles and replace them. This is going to be considerably more expensive than repairing them and will likely be messy and time consuming. In the most severe situations it might be the only option possible. If you simply have a few tiles that are loose then refixing tiles is probably a much better path to take.

There are even a number of different options when it comes to tile repairs. You can try to do it yourself, but this is sometimes not advisable. It’s difficult to get the adhesive in underneath the tiles if you leave them in place. If you try to take the tiles out to put the adhesive on them you run the risk of breaking them. You might end up spending a lot of time on tile repairs and you might not be much closer to a solution.

The best solution for tile repairs is to use a process that will manage to get the adhesive in underneath the tile. The tile reglue injection method forces the adhesive in underneath the tile. It works so well because the adhesive is pressurized and that way it will get to the spaces that you cannot reach when you are simply using something like a caulking gun.

The tile reglue injection method is also an excellent way to do tile repairs because the adhesive that is used as flexible. Buildings to tend to move gradually over time and tiles don’t have any flexibility. If the adhesive that holds them to the substrate is flexible then you can avoid further breakage in the future. That means saving money down the road as well as not having the hassle of doing tile repairs again.

Tile repairs using the injection method is also advantageous because you don’t have to remove any fixtures to repair the tiles. If you were to take up all the tiles, you not only have to remove the tiles themselves but any hardware or fixtures that are fastened on the same wall as the tiles. This is especially useful in bathrooms. To do tile repairs, you don’t have to shut the water off or get a plumber to remove and then replace bathroom fixtures.

If you have tiles on the floor or on a wall that need repair, you should first look into refixing them using the injection method. The sooner you do it, the more likely you are to avoid expensive repairs down the road and you can go about your daily life without having to work around a crew of people that are tearing up your floors or walls.